• 10BASE-T/100BASE-TX copper port
• 100BASE-FX fiber port
• SC connectors
• Multimode fiber

- 1000BASE-LX port (IEEE 802.3z standard) - Duplex LC connector - Full duplex operation - 802.3x flow control support - Fiber type: 9um single-mode fiber up to 10 km - Wave length: 1310nm - Power support: 3.3V - Power budget: 10.5dB - Hot pluggable - Class 1 laser product complies with EN 60825-1 - TTL signal detect indicator - Metal enclosure for lower EMI

The DMC-700SC by D-Link® is a media converter designed to connect 1000BASE-SX fiber to 1000Base-T copper media or vice versa.

High performance, flexibility, fault tolerance, and advanced software features for SMBs, SMEs, large enterprises, and ISPs.

• 20 x SFP ports • 4 x Combo 10/100/1000BASE-T/SFP ports • 4 x 10G SFP+ ports • 6 kV surge protection on all RJ-45 access ports • Switch Resource Management (SRM) for flexible management of system resources • Redundant Power Supply (RPS) support • MPLS L2VPM/L3 VPN support • Full L3 routing protocol support including OSPF, BGP, and ISIS for IPv4/IPv6 • SDN-enabled switch, compatible with Openflow 1.3

Enjoy High-performance Wireless Connectivity - Harness the power of IEEE 802.11ac Wave 2 wireless and experience wireless speeds of up to 1300 Mbps, perfect for high-demand business applications MU-MIMO with Beamforming - Dramatically improves the wireless range and performance as well as allowing multiple devices to connect simultaneously to the wireless network Multiple Operational Modes -Flexible options allows the DAP-2610 to function as an access point, a Wireless Distribution System (WDS), a WDS with access point, or a wireless client

• 4 x 10/100/1000 LAN ports
• 2 x 10/100/1000 WAN port
• Supports up to 95 VPN Tunnels (total)
• 950 Mbps Firewall Throughput
• 50,000 Concurrent Sessions
• 600 Firewall Policies
• Limited Lifetime Warranty

• 10GBASE-LRM Small Form-factor Pluggable Plus (SFP+).
• Standards based 10-Gigabit Ethernet (10GBASE-LRM).
• 10 Gbit/sec line speed.
• Operating distance up to 300m on OS1 fibre or 220m on OM2 fibre.
• Transmitter wavelength 1310nm.
• Industry-standard LC duplex connector.
• Singlemode and Multimode Fibre (SMF/MMF).
• Digital Optical Monitoring (DOM).

• Four Gigabit Ethernet port with Two  Optional Ports for WAN / DMZ

• Manage up to 6 wireless APs and upgradable to 24 APs per controller

• Control up to 24 wireless APs and  maximum 96 APs  in Controller  cluster

• Concurrent Captive Portal for authentication users in wired or wireless deployment

• Centralized RF,Security , Firewall, VPN, Content Filtering  and Policy Management

• Support 802.1x port-based access control and guest VLAN

• Wireless Intrusion Detection & Prevention System (WIDS)

• 1000Base-LX port (IEEE 802.3z standard)
• Duplex LC connector
• Very low jitter
• Full duplex operation
• 802.3x flow control support
• Fibre type: 9/125 um single-mode fibre (up to 50 km.)
• Wavelenght: 1310 nm.
• Power support: 3.3 V.
• Power budget: 22 dB
• Hot pluggable
• Class 1 laser product (complies with EN60825-1)
• TTL signal detect indicator
• Metal enclosure for lower EMI

• Cost-effective solution for 10G fiber connection
• Small form factor, allowing higher port densities for 10G connections
• Lower power dissipation
• Hot-pluggable
• Compliant with Ethernet 802.3ae
• Compliant with fiber MSA (Multiple Source Agreement)

• 20 Ports 10/100/1000 Base-T PoE  with  4 Combo 10/100/1000 Base-T POE /SFP ports

• Support Optional Redundant Power Supply and Smart Fans

•  Support IEEE 802.3af (PoE) and IEEE 802.3at (PoE+) with 370W Power Budget

• Support  ITU-T G.8032 Ethernet Ring Protection Switching (ERPS),

• Switch supports a two rate and single-rate Three Color Marker (trTCM/srTCM)

• Support 802.1 ag Connectivity Fault Management (CFM) and  802.3 ah Ethernet OAM

• Support 802.1 V protocol VLAN, ISM VLAN,  Double VLAN (Q-in-Q) and Selective Q-in-Q

• D-Link Single IP Management (SIM) simplifies and speeds up management

• Built-in 2 x 10G CX4 Stacking  Ports, Stackable up to 6 Units, support 40G Stacking bandwidth

• Comprehensive Security – Multi-layer and Packet Content (ACL), (IMPB) with DHCP Snooping

• Identity Driven Network Policies such as 802.1X,  WAC, and MAC-based Access Control (MAC)

•  High combined data rates of 1167 Mbps (AC 867 Mbps + N 300 Mbps) over the air

• Beamforming technology Bandsteering for efficient traffic management

• Support 8 units to form a  self-configuring cluster  to enable effortless provisioning

• Up to 32 virtual access points (VAP) may be created from a single access point

• WMM Quality of  Service (QOS) makes an ideal AP for audio, video, and voice application.

• Up to 16 SSIDs  per frequency band and 32 SSIDs per AP

• 802.3at Power Over Gigabit Ethernet enables installation at hard to reach locations

• Support Dynamic Auto-Channel Selection in Standalone mode

• Support Load balancing to optimise high network traffic volume and redundancy

• Automatic RF Adjustment and Auto Power management in densely AP deployment

   

• 24 Port 10/100 Base-T PoE Switch with 2 x 10/100/1000 Base-T/SFP Combo Ports

• Support IEEE 802.3af  and 802.3at PoE Standard

• IEEE 802.1Q Virtual LAN (VLAN)

•  Support Auto Surveillance VLAN (ASV), Auto Voice VLAN

• Broadcast, Unicast and Multicast Storm Control

• Support Smart IP-MAC-Port Binding

• Support IEEE 802.1p QOS and COS

• 802.1x port-base Authentication through RADIUS servers

• 48 Port 10/100 Base-T POE Switch with 2 x 10/100/1000 Base-T Ports

• Support 2 x 10/100/1000 Base-T/SFP Combo Slots

• IEEE 802.1Q Virtual LAN (VLAN)

• Support  IGMP and MLD Snooping

• Support Auto Surveillance and Auto Voice VLAN

• Broadcast, Unicast and Multicast Storm Control

• Support Smart IP-MAC-Port Binding

• Support IEEE 802.1p QOS and COS

• 802.1x port-base Authentication through RADIUS servers

• Blazing performance  reaching up to 1 Gbps of network throughput

• 2.4 GHz 802.11n supports up to 300 Mbps and 5 GHz 802.11ac supports up to 867 Mbps

• IP 67-compliant housing to withstand very harsh weather conditions

• Up to 32 virtual access points may be created using a single access point

• Support up to 16 SSIDs  per frequency band and 32 SSIDs per AP

• Automatic load-balancing between linked Access Points

• Flexible Wi-Fi QoS schemes, allowing for controlled and balanced access

• Supports 802.3at Power over  Gigabit Ethernet to be installed in remote locations

• Support Dynamic Auto-Channel Selection, Automatic RF Adjustment and Auto Power management

 

This module provides SNMP-based and web-based management of all media converter and power supply modules installed in the DMC-1000 chassis. It features a 32-bit, high performance RISC microprocessor executing a real-time operating system. It provides a 10/100Mbps Fast Ethernet port for network connection, allowing you to configure and monitor the system through an SNMP management station or from a PC running an Internet browser.

• Full HD 1080p, 30 fps
• 3-Megapixel sensor, supporting resolution up to 2048 x 1536
• Day and night with ICR filter and IR LED
• 10m night vision
• Wide Dynamic Range
• 3D Noise Reduction
• Supports Power over Ethernet

• 1000Base-LX port (IEEE 802.3z standard)
• Duplex LC connector
• Very low jitter
• Full duplex operation
• 802.3x flow control support
• Fibre type: 9/125 um single-mode fibre (up to 80 km.)
• Wavelength: 1550 nm.
• Power support: 3.3 V.
• Power budget: 22dB
• Low power dissipation <700mW
• Hot pluggable
• Class 1 laser product (complies with EN60825-1)
• TTL signal detect indicator
• Metal enclosure for lower EMI

• 8 Port 10/100 Base-T POE Switch

• Support IEEE 802.3af POE Standard

• IEEE 802.1Q Virtual LAN (VLAN)

• Support Auto Surveillance and Auto Voice VLAN

• Broadcast, Unicast and Multicast Storm Control

• Support Smart IP-MAC-Port Binding

• Support IEEE 802.1p QOS and COS

• 802.1x port-base Authentication through RADIUS servers

• IEEE 802.11n wireless • High-speed wireless speeds of up to 300 Mbps • Gigabit LAN port • Traffic control/QoS • Supports WPA2™ - WiFi security for more protection • Supports 802.3af Power over Ethernet • Wall and ceiling mounting brackets included

Bidirectional SFP Transceiver 1 Port 10GBASE-LR (without DDM) for singlemode fiber optic cable, power supply 3.3V (up to 20km), WDM (TX: 1270nm, RX: 1330nm)

• Four Gigabit Ethernet port with one hard Drive Extension Slot • Manage up to 64 wireless APs and upgradable to 256 APs per controller • Manage up to a maximum of 1024 APs in a Controller cluster • Self-healing and self-optimizing technology combined with 4+4 wireless controller redundancy and RF scanning • Concurrent Captive Portal for authentication users in wired or wireless deployment • Centralized RF,Security , Firewall, VPN, Content Filtering and Policy Management • Support 802.1x port-based access control and guest VLAN • Wireless Intrusion Detection & Prevention System (WIDS)

- 1000BASE-SX port (IEEE 802.3z standard) - Duplex LC connector - Full duplex operation - 802.3x flow control support - Fiber type: 50um or 62.5um multi-mode fiber up to 550 m - Wave length: 850nm - Power support: 3.3V - Hot pluggable - Class 1 laser product complies with EN 60825-1 - TTL signal detect indicator - Metal enclosure for lower EMI